Hi there, I have just bought an Nvidia GTS 450 and I had hoped to install it into my Pegatron M2N78-LA motherboard (it has an integrated Nvidia Geforce 9100), but whenever I try booting up my computer with the card in, my monitor stays idle and my computer boots for about a minute before it crashes.
Before installing my new card, I went into the device manager and disabled my integrated chip in safemode, powered off my system, and then popped my card in.
A word of note: the first time i tried installing my new Nvidia, I accidentally chose to Uninstall the integrated card on the Device Manager rather than disabling it, but the next time I booted my system without my new card in it, it automatically downloaded drivers for the integrated card and seemingly works fine.
I've narrowed my problem down to two possible options:
1. My new GTS 450 is incompatible with my motherboard
2. The drivers for my new hardware are all f*cked up
If you could give me any advice at all that may help, I would really appreciate it! Thanks in advance!|||Boot into VGA mode, then install the drivers.
Thursday, April 26, 2012
Video Card for my computer?
this is my motherboard and i was wondering if i buy a (POWERCOLOR AX5770 1GBD5-H Radeon HD 5770 1GB GDDR5 PCI Express x16 (2.1v)) will this work with my computer? im not too sure if my pci slot is 2.0 and if it isnt then will this still work?
Manufacturer: Pegatron
Motherboard Name: M2N78-LA
HP/Compaq motherboard name: Violet-GL8E
this is my computers specs
Manufacturer # AV021AA#ABA
processor brand AMD
processor model Athlon II X4 Quad-Core
memory 8 GB
hard drive capacity 640 GB
optical drive DVD±RW/DVD-RAM/DVD±R Double Layer
operating system Windows 7 Home Premium 64-bit
processor speed 2.6 GHz
frontside bus speed 4000 MHz
memory speed PC2-6400
memory type DDR SDRAM
maximum memory capacity 16 GB
network connectivity 10/100 Ethernet
modem 56K V.90
ports 6 USB 2.0; 1 FireWire; 1 Ethernet; 2 PS/2; 1 VGA 15-pin D-sub
memory card reader yes
video graphics nVidia GeForce 9100 graphics with 256MB-3838MB shared memory
audio hardware High Definition Audio with up to 7.1-channel surround sound
peripherals included LCD monitor; keyboard; optical mouse
warranty length 1-year limited
model name Pavilion p6228p-b
brand name HP
manufacturer Hewlett-Packard|||According to the HP site, your motherboard is compatible with this video card. It has one PCI-Express 16x slot and 3 PCI-Express 1x slots. Unfortunately this video card requires a 450 watt power supply and your system only has a 300 watt power supply.|||you have a PCI Express X16 slot available for your video card
HPs specs are always severely lacking in details so you will probably have to call them, but it probably is.
The other issue is that they don't tell what power supply you have. You may be able to see read it on the side. You will likely have to stick in a stronger PS for your video card.|||I recommed you to use Leawo Free DVD Creator.It can burn videos to dvd with menu easily and quickly.Download Leawo Free DVD Creator here:
http://www.google.com/search?hl=en&newwi… Wish it can help, good luck!
Manufacturer: Pegatron
Motherboard Name: M2N78-LA
HP/Compaq motherboard name: Violet-GL8E
this is my computers specs
Manufacturer # AV021AA#ABA
processor brand AMD
processor model Athlon II X4 Quad-Core
memory 8 GB
hard drive capacity 640 GB
optical drive DVD±RW/DVD-RAM/DVD±R Double Layer
operating system Windows 7 Home Premium 64-bit
processor speed 2.6 GHz
frontside bus speed 4000 MHz
memory speed PC2-6400
memory type DDR SDRAM
maximum memory capacity 16 GB
network connectivity 10/100 Ethernet
modem 56K V.90
ports 6 USB 2.0; 1 FireWire; 1 Ethernet; 2 PS/2; 1 VGA 15-pin D-sub
memory card reader yes
video graphics nVidia GeForce 9100 graphics with 256MB-3838MB shared memory
audio hardware High Definition Audio with up to 7.1-channel surround sound
peripherals included LCD monitor; keyboard; optical mouse
warranty length 1-year limited
model name Pavilion p6228p-b
brand name HP
manufacturer Hewlett-Packard|||According to the HP site, your motherboard is compatible with this video card. It has one PCI-Express 16x slot and 3 PCI-Express 1x slots. Unfortunately this video card requires a 450 watt power supply and your system only has a 300 watt power supply.|||you have a PCI Express X16 slot available for your video card
HPs specs are always severely lacking in details so you will probably have to call them, but it probably is.
The other issue is that they don't tell what power supply you have. You may be able to see read it on the side. You will likely have to stick in a stronger PS for your video card.|||I recommed you to use Leawo Free DVD Creator.It can burn videos to dvd with menu easily and quickly.Download Leawo Free DVD Creator here:
http://www.google.com/search?hl=en&newwi… Wish it can help, good luck!
If a video card requires 300w and i have a 300w psu is it ok?
if i get a video card and it requires 300w and my pc only has 300w psu is it ok or should i get a higher psu like 400w?
heres some info about my computer
its an Compaq cq5110y
Operating System
MS Windows 7 Home Premium 32-bit SP1
CPU
AMD Athlon 7550
Kuma 65nm Technology
RAM
3.00 GB Dual-Channel DDR2 @ 401MHz (6-6-6-18)
Motherboard
PEGATRON CORPORATION NARRA5 (Socket AM2 )
Graphics
Compaq Q1859 (1366x768@60Hz)
128MB GeForce 6150SE nForce 430 (HP)
Hard Drives
313GB Western Digital WDC WD32 00AAJS-65M0A SCSI Disk Device (ATA)
Optical Drives
TSSTcorp CDDVDW TS-H653R SCSI CdRom Device
i want to upgrade my graphics with a
Galaxy - GeForce GT 520 PCI Express 2.0 Graphics Card|||If your video card requires 300 Watts, where does the power come from to run the rest of your system? The above description needs a minimum of 600 Watts to run. Bigger is Better!
If you don't get a larger power supply, this is what will happen. You will reach the current limit of your voltage bus by just turning your computer on. The voltage will be reduced by your power supply to solve the over current condition safely. The voltage will then drop below what the chips in your computer can operate and they will stop working without having a safe shut down. This can damage your system.
It is better to spend a little bit more to get the largest fit, form, and function power supply you can find. It is the least expensive way to go.|||since its a "factory" PSU its not of the best quality and will probably take the card but burn out early. The general rule of thumb is...use the 20% rule that is, what ever you min. video card power is...add 20%. in your case 300W + 20% = 360W or something like this...http://www.newegg.com/Product/Product.as…
Of course 400W would be better but not necessary
heres some info about my computer
its an Compaq cq5110y
Operating System
MS Windows 7 Home Premium 32-bit SP1
CPU
AMD Athlon 7550
Kuma 65nm Technology
RAM
3.00 GB Dual-Channel DDR2 @ 401MHz (6-6-6-18)
Motherboard
PEGATRON CORPORATION NARRA5 (Socket AM2 )
Graphics
Compaq Q1859 (1366x768@60Hz)
128MB GeForce 6150SE nForce 430 (HP)
Hard Drives
313GB Western Digital WDC WD32 00AAJS-65M0A SCSI Disk Device (ATA)
Optical Drives
TSSTcorp CDDVDW TS-H653R SCSI CdRom Device
i want to upgrade my graphics with a
Galaxy - GeForce GT 520 PCI Express 2.0 Graphics Card|||If your video card requires 300 Watts, where does the power come from to run the rest of your system? The above description needs a minimum of 600 Watts to run. Bigger is Better!
If you don't get a larger power supply, this is what will happen. You will reach the current limit of your voltage bus by just turning your computer on. The voltage will be reduced by your power supply to solve the over current condition safely. The voltage will then drop below what the chips in your computer can operate and they will stop working without having a safe shut down. This can damage your system.
It is better to spend a little bit more to get the largest fit, form, and function power supply you can find. It is the least expensive way to go.|||since its a "factory" PSU its not of the best quality and will probably take the card but burn out early. The general rule of thumb is...use the 20% rule that is, what ever you min. video card power is...add 20%. in your case 300W + 20% = 360W or something like this...http://www.newegg.com/Product/Product.as…
Of course 400W would be better but not necessary
How do i install a video card on my computer?
I have a HP pavilion (model a6642p) with Windows Vista 64-bit, Motherboard mod PEGATRON CORPORATION - Benicia.
It has an onboard video card, with only one monitor hookup. I am trying to set up for dual monitors. I have a video card i swiped from an old computer and was wondering how to get it installed in my computer.
Here is the availible slots:
http://img853.imageshack.us/i/motherboar…
The video card info is this:
D-Ying M-VO e150630 94V-O
picture:
http://img824.imageshack.us/i/videocard.…
Any help would be great, as i know only enough about computers to get myself into trouble.
I tried to fit the card into the black slot in the picture, it fits in fine. I than tried to turn the computer on, and nothing happened. Nothing came up on my existing monitor. So, i just turned it back off, unplugged it, pulled the card out, and my computer started up just fine.
So, how do i go about getting this thing installed, and setup to run dual monitors?
Thanks in advance for the help!|||Wow, Joel, Para, and AO fail hard. Did you guys even look at the pictures? He tried to install an AGP card into A PCI-E slot. How it actually fits is beyond me. It won't work, sorry dude. You'll need a PCI or PCI-E video card. I can't believe you didn't screw up your motherboard when you plugged in that AGP. If anything you probably ****** up the AGP card. Get a PCI or PCI-E video card, and make sure your power supply is high enough wattage to support it.
- Okay then. If that is all you are planning on doing, something around the lines of a Radeon HD 3450 would be good. They are only like $40 to. A Nvidia GT-210 also wouldn't be a bad choice. Basically anything that is PCI-E with two monitor outputs would work good for you.|||My guess is that you can't use both the integrated and an add-on graphics adapter at the same time, you'll have to choose which one to use. To disable the onboard one you have to enter the BIOS settings and disable the integrated card there.|||It was working fine when you turned the computer off. Of course nothing came up on your existing monitor, you installed a video card. Connect both monitors to the video card's two ports.|||You have to make sure the model of the video card is the right specification for the motherboard. I tried looking up the specs of the video card, but it's in another language so I'm not sure. If the motherboard is PCI-E (pic express) then the video card needs to be PCI-E as well.
When you installed the video card, did you make sure it was all the way in? Sometimes you need to give it a firm push, but nothing too hard.
It's tough to tell from the picture, but does the video card have a slot on the end of it that requires a power plug?
You might want to get an air can to blow onto the video card and onto the motherboard just in case dust is interfering. Make sure you aren't trying to install the card until the computer is fully turned off and the power cable is unplugged, and don't be on carpet while doing this, make sure to put newspaper under your feet.
If none of that helps, the video card may be bad, but it's tough to help much more without being there. Hope some of this helps.|||Your motherboard has one PCI-Express slot (black) plus one old PCI slot (white)
So you can install either a PCI-Express or PCI graphics card. I believe the one you have is AGP, so it won't fit into that computer.
It has an onboard video card, with only one monitor hookup. I am trying to set up for dual monitors. I have a video card i swiped from an old computer and was wondering how to get it installed in my computer.
Here is the availible slots:
http://img853.imageshack.us/i/motherboar…
The video card info is this:
D-Ying M-VO e150630 94V-O
picture:
http://img824.imageshack.us/i/videocard.…
Any help would be great, as i know only enough about computers to get myself into trouble.
I tried to fit the card into the black slot in the picture, it fits in fine. I than tried to turn the computer on, and nothing happened. Nothing came up on my existing monitor. So, i just turned it back off, unplugged it, pulled the card out, and my computer started up just fine.
So, how do i go about getting this thing installed, and setup to run dual monitors?
Thanks in advance for the help!|||Wow, Joel, Para, and AO fail hard. Did you guys even look at the pictures? He tried to install an AGP card into A PCI-E slot. How it actually fits is beyond me. It won't work, sorry dude. You'll need a PCI or PCI-E video card. I can't believe you didn't screw up your motherboard when you plugged in that AGP. If anything you probably ****** up the AGP card. Get a PCI or PCI-E video card, and make sure your power supply is high enough wattage to support it.
- Okay then. If that is all you are planning on doing, something around the lines of a Radeon HD 3450 would be good. They are only like $40 to. A Nvidia GT-210 also wouldn't be a bad choice. Basically anything that is PCI-E with two monitor outputs would work good for you.|||My guess is that you can't use both the integrated and an add-on graphics adapter at the same time, you'll have to choose which one to use. To disable the onboard one you have to enter the BIOS settings and disable the integrated card there.|||It was working fine when you turned the computer off. Of course nothing came up on your existing monitor, you installed a video card. Connect both monitors to the video card's two ports.|||You have to make sure the model of the video card is the right specification for the motherboard. I tried looking up the specs of the video card, but it's in another language so I'm not sure. If the motherboard is PCI-E (pic express) then the video card needs to be PCI-E as well.
When you installed the video card, did you make sure it was all the way in? Sometimes you need to give it a firm push, but nothing too hard.
It's tough to tell from the picture, but does the video card have a slot on the end of it that requires a power plug?
You might want to get an air can to blow onto the video card and onto the motherboard just in case dust is interfering. Make sure you aren't trying to install the card until the computer is fully turned off and the power cable is unplugged, and don't be on carpet while doing this, make sure to put newspaper under your feet.
If none of that helps, the video card may be bad, but it's tough to help much more without being there. Hope some of this helps.|||Your motherboard has one PCI-Express slot (black) plus one old PCI slot (white)
So you can install either a PCI-Express or PCI graphics card. I believe the one you have is AGP, so it won't fit into that computer.
COMPUTER VIDEO CARD HELP!!!?
i HAVE AN HP PAVILION P6122F WITH A MOTHERBOARD Pegatron M2N78-LA Violet-GL8E. i WANT TO BUY A VIDEO(GRAPHICS)CARD. hERE ARE THE MOTHERBOARD SPECS:
Integrated graphics using nVidia GeForce 9100.
Supports concurrent use of dual displays connected to onboard DVI and VGA connectors.
Also supports PCI Express x16 graphics cards as independent graphics adapters.*
i WANT TO BUY THE
BFG Tech BFGE94512GTE GeForce 9400 GT 512MB 128-bit GDDR2 PCI Express 2.0 x16 HDCP Ready Video Card. wOULD IT BE POSSIBLE AND WILL MY COMPUTER SUPPORT IT?|||As you have a 300W power supply, you will be constrained as to which video cards you may be able to use without buying a new PSU. A quick dig shows the NV 8400 as using about 50W so that shouldn't be a problem.
On a different tack, I would suggest you consider a more powerful video card. The Radeon 4650 and 4670 will not use much more power but do it so much more efficiently. The extra $20 will indeed be very well spent.
Either way,
Good luck.
Integrated graphics using nVidia GeForce 9100.
Supports concurrent use of dual displays connected to onboard DVI and VGA connectors.
Also supports PCI Express x16 graphics cards as independent graphics adapters.*
i WANT TO BUY THE
BFG Tech BFGE94512GTE GeForce 9400 GT 512MB 128-bit GDDR2 PCI Express 2.0 x16 HDCP Ready Video Card. wOULD IT BE POSSIBLE AND WILL MY COMPUTER SUPPORT IT?|||As you have a 300W power supply, you will be constrained as to which video cards you may be able to use without buying a new PSU. A quick dig shows the NV 8400 as using about 50W so that shouldn't be a problem.
On a different tack, I would suggest you consider a more powerful video card. The Radeon 4650 and 4670 will not use much more power but do it so much more efficiently. The extra $20 will indeed be very well spent.
Either way,
Good luck.
What video card will work for my computer?
Here is my system specs writen by norton 360 report:
PC Manufacturer HP-Pavilion
Model FQ516AA-A2L a6648f
Motherboard Manufacturer PEGATRON CORPORATION
Product Benicia
CPU Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Version Intel64 Family 6 Model 15 Stepping 11
Data Width 64bits
L2 Cache Size 8,192Kb
Approximate Current Clock Speed 2,400Mhz
Approximate Maximum Clock Speed 2,400Mhz
BIOS BIOS Date: 09/05/08 10:24:25 Ver: 5.30
Date 04/09/2008
Version HPQOEM - 20080905
Memory slots available on motherboard 4
Memory Chip DIMM0
RAM 1,024Mb
Speed 800ns
Memory Chip DIMM1
RAM 1,024Mb
Speed 800ns
Memory Chip DIMM2
RAM 1,024Mb
Speed 800ns
Memory Chip DIMM3
RAM 1,024Mb
Speed 800ns
Motherboard Device
Status On
Motherboard Device Intel(R) HD Audio
Status On
Motherboard Device
Status On
System Slot PCI-E x16
Status Available
System Slot PCI-E x1
Status Available
System Slot PCI-E x1
Status Available
System Slot PCI1
Status Available
CD Drive HL-DT-ST DVD-RAM GH15L
Media Type DVD Writer
Version FD6E
Video Manufacturer Intel Corporation
Video Card Intel(R) G33/G31 Express Chipset Family
RAM 320Mb
Mode 1680 x 1050 x 4294967296 colors
Driver igdumd64.dll
Date 26/02/2009
Version 7.15.10.1666
Hard Disk Model SAMSUNG HD502IJ
Interface SCSI
Hard Disk Model Generic- Compact Flash USB Device
Interface USB
Hard Disk Model Generic- MS/MS-Pro USB Device
Interface USB
Hard Disk Model Generic- SD/MMC USB Device
Interface USB
Hard Disk Model Generic- SM/xD-Picture USB Device
Interface USB
Network Adapter Realtek RTL8168C(P)/8111C(P) Family PCI-E GBE NIC
Service Name RTL8169
Sound Manufacturer Realtek
Model Realtek High Definition Audio|||Any PCI-E x16 card will work the only limit is the money you wish to spend, if you're playing newer games I suggest at least a HD4870 Oh and you'll need at least a 400watts Power supply with 2 6 pin connectors for a HD4870|||Depends how you have to spend i will suggest something like the ATI 5850 or Nvidia 260 to me they are the best bang for you buck|||From what I can tell you will have to get a card that goes into a PCIe x16 or PCIe 2.0 x16
so basically any of them that fit in those (which is most)|||Ok, your computer has a PCIe x 16 slot, so provided you have a big enough power supply, AND the case has at least 10.5" from the back of the chasis to the hard disk cage which is needed to fit the bigger cards into - you should be able to use any PCIe x 16 card, including nVidia and AMD video cards.
Your power supply must have at least one 6 pin 12 volt connector for any advanced card like a GTX 260 or an AMD 4870 card. You should figure at least 200 WORKING WATTS for a single card.
You will need to measure the inside of your case and make sure you have enough room to fit these large, full height cards into the case.
PC Manufacturer HP-Pavilion
Model FQ516AA-A2L a6648f
Motherboard Manufacturer PEGATRON CORPORATION
Product Benicia
CPU Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Version Intel64 Family 6 Model 15 Stepping 11
Data Width 64bits
L2 Cache Size 8,192Kb
Approximate Current Clock Speed 2,400Mhz
Approximate Maximum Clock Speed 2,400Mhz
BIOS BIOS Date: 09/05/08 10:24:25 Ver: 5.30
Date 04/09/2008
Version HPQOEM - 20080905
Memory slots available on motherboard 4
Memory Chip DIMM0
RAM 1,024Mb
Speed 800ns
Memory Chip DIMM1
RAM 1,024Mb
Speed 800ns
Memory Chip DIMM2
RAM 1,024Mb
Speed 800ns
Memory Chip DIMM3
RAM 1,024Mb
Speed 800ns
Motherboard Device
Status On
Motherboard Device Intel(R) HD Audio
Status On
Motherboard Device
Status On
System Slot PCI-E x16
Status Available
System Slot PCI-E x1
Status Available
System Slot PCI-E x1
Status Available
System Slot PCI1
Status Available
CD Drive HL-DT-ST DVD-RAM GH15L
Media Type DVD Writer
Version FD6E
Video Manufacturer Intel Corporation
Video Card Intel(R) G33/G31 Express Chipset Family
RAM 320Mb
Mode 1680 x 1050 x 4294967296 colors
Driver igdumd64.dll
Date 26/02/2009
Version 7.15.10.1666
Hard Disk Model SAMSUNG HD502IJ
Interface SCSI
Hard Disk Model Generic- Compact Flash USB Device
Interface USB
Hard Disk Model Generic- MS/MS-Pro USB Device
Interface USB
Hard Disk Model Generic- SD/MMC USB Device
Interface USB
Hard Disk Model Generic- SM/xD-Picture USB Device
Interface USB
Network Adapter Realtek RTL8168C(P)/8111C(P) Family PCI-E GBE NIC
Service Name RTL8169
Sound Manufacturer Realtek
Model Realtek High Definition Audio|||Any PCI-E x16 card will work the only limit is the money you wish to spend, if you're playing newer games I suggest at least a HD4870 Oh and you'll need at least a 400watts Power supply with 2 6 pin connectors for a HD4870|||Depends how you have to spend i will suggest something like the ATI 5850 or Nvidia 260 to me they are the best bang for you buck|||From what I can tell you will have to get a card that goes into a PCIe x16 or PCIe 2.0 x16
so basically any of them that fit in those (which is most)|||Ok, your computer has a PCIe x 16 slot, so provided you have a big enough power supply, AND the case has at least 10.5" from the back of the chasis to the hard disk cage which is needed to fit the bigger cards into - you should be able to use any PCIe x 16 card, including nVidia and AMD video cards.
Your power supply must have at least one 6 pin 12 volt connector for any advanced card like a GTX 260 or an AMD 4870 card. You should figure at least 200 WORKING WATTS for a single card.
You will need to measure the inside of your case and make sure you have enough room to fit these large, full height cards into the case.
Video card upgrade for a Pegatron M2N68-LA mother board?
Im looking for a video card upgrade for my compaq Presario cq5500f( Pegatron M2N68-LA mother board) with a 460watt upgrade, im kinda a noob when it comes to getting a video card. When i was looking for a video card, I saw brand names such as ASUS,diamond, galaxy, giga bite, etc. what does that mean?|||That motherboard supports PCI express graphics card. If you are putting a good/true-rated 460 watt power supply, then consider the Radeon HD 5770 or the Geforce GTS 450 graphics cards. These cards come in various brand names because there are several manufacturers such as those you mentioned.
Wednesday, April 18, 2012
Could my computer run this video card : Saphire Radeon HD 5670 1GB GDDR5 PCI-E Video Card?
My computer specs:
2.40 gigahertz Intel Core2 Quad Q6600
Board: PEGATRON CORPORATION Benicia 1.01
8 GB Ram
700 GB Hard Drive
Will i be able to play Battlefield 3 on Medium to Low settings
Here`s the link to it http://www.futureshop.ca/en-CA/product/a-t-i-diamond-ati-radeon-hd-5670-1gb-gddr5-pci-e-video-card-a5670pe51g/10144108.aspx?path=19d381156bc1d608d2f34f66f35346been02|||I need your power supply information and motherboard model number to see if you can use that card.
As for running BF3 with that... I don't think you could run it even on low. Maybe with 800x600 resolution but those specs are cutting it close.
2.40 gigahertz Intel Core2 Quad Q6600
Board: PEGATRON CORPORATION Benicia 1.01
8 GB Ram
700 GB Hard Drive
Will i be able to play Battlefield 3 on Medium to Low settings
Here`s the link to it http://www.futureshop.ca/en-CA/product/a-t-i-diamond-ati-radeon-hd-5670-1gb-gddr5-pci-e-video-card-a5670pe51g/10144108.aspx?path=19d381156bc1d608d2f34f66f35346been02|||I need your power supply information and motherboard model number to see if you can use that card.
As for running BF3 with that... I don't think you could run it even on low. Maybe with 800x600 resolution but those specs are cutting it close.
I want to buy a new graphic/video card can anyone help please?
Hello I bought a new computer and I want to get a better video card for it... here are the specs:
HP-Pavilion FQ512AA-ABA m9402f
a PEGATRON CORPORATION NARRA3 3.02 mother board
Windows Vista Home Premium (x64)
2.30 gigahertz AMD Phenom 9650 Quad-Core
NVIDIA GeForce 6150SE nForce 430
can someone please tell me which graphic/video card will be compatible/good to play extreme games...
I am willing to spend up to $300 on the graphic card.|||That particular HP Pavilion has one single PCI Express 16x slot.
You can use any PCI Express 16x video card currently on the market, as long as it will fit lengthwise in your Pavilion's case and your PSU is powerful enough to drive it.
Hope this helps.
HP-Pavilion FQ512AA-ABA m9402f
a PEGATRON CORPORATION NARRA3 3.02 mother board
Windows Vista Home Premium (x64)
2.30 gigahertz AMD Phenom 9650 Quad-Core
NVIDIA GeForce 6150SE nForce 430
can someone please tell me which graphic/video card will be compatible/good to play extreme games...
I am willing to spend up to $300 on the graphic card.|||That particular HP Pavilion has one single PCI Express 16x slot.
You can use any PCI Express 16x video card currently on the market, as long as it will fit lengthwise in your Pavilion's case and your PSU is powerful enough to drive it.
Hope this helps.
Need help picking a new Video Card please?
I have a Pegatron Violet 3.02 Motherboard with and Integrated NVIDIA GeForce 9100 currently in it (stock.) I am not a big gamer but new games that are coming out, such as Star Wars the old republic, are not playable for me because of my video card alone. Everything else passes the test.
I need to pick a cheap card that will get me playing pc games for the next couple years. (specifically diablo 3 and Star Wars TOR as my next games) The cheaper the better as i am not huge on graphics (or money) and normally play on low setting anyways just for the performance increase.
So im pretty sure it needs to be PCI-E (but im not sure what the 2.0 and 2.1 stuff is about).
My computers stats are.
AMD Athlon II 620 Quad Core (approx 2.6 GHz)
Pegatron Corp. Violet 3.02 motherboard
Power Supply of 300w
6gb Ram.
One last thing, my current graphics card is integrated so not sure how to turn that off and remove it either. Thanks!|||Im getting that game I cant wait..although i have to wait 5 months to save up enough cash for a decent gaming computer. A Radeon 6570 will handle that game with high settings.
I need to pick a cheap card that will get me playing pc games for the next couple years. (specifically diablo 3 and Star Wars TOR as my next games) The cheaper the better as i am not huge on graphics (or money) and normally play on low setting anyways just for the performance increase.
So im pretty sure it needs to be PCI-E (but im not sure what the 2.0 and 2.1 stuff is about).
My computers stats are.
AMD Athlon II 620 Quad Core (approx 2.6 GHz)
Pegatron Corp. Violet 3.02 motherboard
Power Supply of 300w
6gb Ram.
One last thing, my current graphics card is integrated so not sure how to turn that off and remove it either. Thanks!|||Im getting that game I cant wait..although i have to wait 5 months to save up enough cash for a decent gaming computer. A Radeon 6570 will handle that game with high settings.
Subscribe to:
Comments (Atom)